HledejSoučástky.cz


Nalezených součástek: 2       Optimalizace nákupu
Součástka:
Řadit:
Obrázek Název Cena
s DPH
Sklad Obchod Sklad.č. Detail dostupnost Slevy
Optimalizace:
Popis
ANALYZÁTOR POLOVODIČOVÝCH SOUČ.. 6505,00 Kč Nejsou PSE 5201-2697
1 ks 6505,00 Kč
ADVANCED SEMICONDUCTOR ANALYZER with Curve Tracing, The DCA Pro has an advanced new design that features a graphics display, USB communications, PC software and an enhanced component identification library., Features, stand-alone or with a PC, automatic component type identification, automatic pinout identification, special feature identification such as protection diodes and resistor shunts, bipolar transistors: gain and leakage current measurements, silicon and germanium detection, gate threshold measurement for Enhancement Mode MOSFETs, semiconductor forward voltage measurement for diodes, LEDs and, transistor Base-Emitter junctions, automatic and manual power-off, Specifications, Specification Summary at 20°C (68°F) unless otherwise specified, peak test current into short circuit: -5.5 mA to 5.5 mA, peak test voltage across open circuit: -5.1 V to 5.1 V, transistor:, gain range (Hfe): 4 - 65 000, gain accuracy: ± 3% ± 5 Hfe, Vceo test voltage: 2.0 V - 3.0 V, Vbe accuracy: -2% -20 mV to +2% + 20 mV, VBE for Darlington (shunted): 0.95 V - 1.80 V (0.75 V - 1.80 V), base-emitter shunt threshold: 50 k&Omega, - 70 k&Omega,, BJT collector test current: 2.45 mA - 2.55 mA, BJT acceptable leakage: 0.7 mA, MOSFET:, gate threshold range: 0.1 V - 5.0 V, threshold accuracy: -2% -20 mV to +2% +20 mV, drain test current: 2.45 mA - 255 mA, gate resistance: 8 k&Omega,, depletion drain test current: 4.5 mA, JFET drain-source test current: 0.5 mA - 5.5 mA, SCR/Triac:, gate test current: 4.5 mA, load test current: 5.0 mA, diode:, test current: 5.0 mA, voltage accuracy: -2% -20 mV to +2% +20 mV, Vf for LED identification: 1.50 V - 4.00 V, short circuit threshold: 10 &Omega,, battery:, type: MN21 / L1028 / GP23A 12 V alkaline, voltage range: 7.50 V - 12 V, warning threshold: 8.25 V, dimensions: 103 x 70 x 20 mm, Weight per product (nett): 0.098kg, operating temperature range: 10°C ... 40°C
COMPONENT TESTER HPS141 1316,00 Kč Nejsou PSE 5210-0041
1 ks 1316,00 Kč
COMPONENT TEST OPTION FOR HANDHELD OSCILLOSCOPE - HPS140MK2, Connect this easy to use component tester to your handheld oscilloscope (HPS140MK2) and receive all useful information about resistors, transistors, diodes and more, including their pin out identification., Features, a single button test, a test indicator, auto shutdown, shows pin layout, handheld oscillopscope (HPS140MK2) needed (not included), only compatible with the HPS140MK2 (not included), battery included, component analyzer with automatic pin out identification, Specifications, dimensions: 23 x 96 x 15mm (W x L x H) (without cables), supported components: SCR, JFET, E-IGBT, D-IGBT, E-MOS, D-MOS, resistor, coil, capacitor, diode, transistor, resistance resolution: 0.1Ohm (max 50 Ohm), capacitance range: 28pF to 100.000µF, inductance range: 0.01mH to 20H, standby current: 20nA, power supply: 12V battery GP23A (included), test current: approx. 20mA, test speed: 2 seconds
Reklama:

Velký dron s HD kamerou Létejte z pohledu pilota pomocí obrazovky mobilu. Foťte a natáčejte úžasná letecká videa a snímky.