HledejSoučástky.cz


Nalezených součástek: 19       Optimalizace nákupu
Součástka:
Řadit:
Obrázek Název Cena
s DPH
Sklad Obchod Sklad.č. Detail dostupnost Slevy
Optimalizace:
Popis
Hmatník B17172 ORANGE 3,40 Kč Skladem GME 624-076
Kruhový hmatník oranžový k B1729 -
Svorkovnice AKZ3191/10KD-2.54-ORANGE 45,00 Kč Skladem GME 821-141
Pružinová svorkovnice do DPS, oranžová. Počet kon...
Svorkovnice AKZ3191/13KD-2.54-ORANGE 58,00 Kč Skladem GME 821-144
Pružinová svorkovnice do DPS, oranžová. Počet kon...
Signálka 230VAC C2820-00 ORANGE 73,00 Kč Skladem GME 631-208
Signálka oranžová 230VAC faston 6,3mm
LED pásek 30LED/m, orange, 7,2W/m, IP65, 1m 159,00 Kč Skladem GME 960-321
LED pásek, 12V; 7,2W/m; oranžová Příkon je udáván...
Orange Pi ZERO, wifi 649,00 Kč Skladem GME 769-502
Orange PI přichází s verzí Zero, která je ale oproti...
Orange Pi One, 4x1,2GHz, 512MB DDR3 729,00 Kč Skladem GME 769-465
Specifikace hardware Procesor: H3 Quad-core Corte...
Orange Pi Lite, 4x1,2GHz, 512M DDR3, WIFI 799,00 Kč Skladem GME 769-470
4 jádrový minipočítač taktem 1,2GHz, 512MB DDR3 a po...
Napájecí adaptér síťový 5V 3000mA 4/1,7mm pro Orange Pi 387,00 Kč Neznama GME 751-885
Spínaný napájecí stabilizovaný síťový adaptér, pro O...
Svorkovnice AKZ3191/48KD-2.54-ORANGE 212,00 Kč Neznama GME 821-143
Pružinová svorkovnice do DPS, oranžová. Počet kon...
Orange Pi Plus2E, 4x1,6GHz, 2G DDR3, 16GB Flash,1G, WIFI 2,00 Kč Neznama GME 769-466
Specifikace hardware - Procesor: H3 Quad-core Corte...
Orange Pi PC Plus, 4x1,6GHz, 1G DDR3, 8GB Flash, WIFI 1,00 Kč Neznama GME 769-464
Mikropočítač se čtyřjádrovým procesorem na 1,6GHz, 1...
Orange Pi PC, 4x1,6GHz, 1G DDR3 939,00 Kč Neznama GME 769-471
Orange Pi PC H3 Quad-core 1.6GHz, 1G RAM Ubuntu Linu...
Popisovač permanentní MARKER PEN - Orange 60,00 Kč Neznama GME 746-008
Kvalitní permanentní popisovač, použitelný na většin...
Svorkovnice AKZ3191/27KD-2.54-ORANGE 120,00 Kč Neznama GME 841-225
Pružinová svorkovnice do DPS, oranžová. Počet kon...
Násuvná svorkovnice AK1550/4-3.5-ORANGE 28,00 Kč Neznama GME 841-217
Násuvná svorkovnice na kabel,oranžová (RAL2011). ...
VM192IR RGB LED CONTROLLER - I.. 1328,00 Kč Nejsou PSE 5503-433
1 ks 1328,00 Kč
RGB LED CONTROLLER - IR VERSION, (sestavený výrobek), VM192IR is an infrared remote controlled RGB driver for 12 or 24 VDC LED strips. It allows you to set a colour manually or loop through all colours automatically, with 4 selectable fading speeds. A built-in dimmer allows the user to adjust the intensity, regardless of the chosen colour or mode., Features, includes one 4-channel infrared remote, IR module can be placed up to 1 m away, colour, intensity and mode are retained and will be restored after a power, failure, speed determined by jumper setting, can also be used as a single channel LED dimmer, smooth manual scrolling through red-orange-yellow-green-blue-indigo-violet, with up/down buttons, fix a manually selected colour, Specifications, power supply: 12..24 VDC, current: 2.5 A/channel max. (30 W / 12 V, 60 W / 24 V max.), PWM frequency /resolution: 245 Hz, 10-bit, intensity levels: 32, colour loop time (R->G->B->R): 50 s, 1 min 40 s, 2 min 30 s, or 3 min 20 s, max. ambient temp: 30 °C / 86 °F, remote range: up to 10 m (fresh battery, line of sight, no interference), remote power supply: V23GA or GP23GAC 12 V battery (included), dimensions:, controller: 80 x 70 x 23 mm, remote: 88 x 37 x 13 mm
VM192RF RGB LED CONTROLLER - R.. 1599,00 Kč Nejsou PSE 5503-434
1 ks 1599,00 Kč
RGB LED CONTROLLER - RF VERSION, (sestavený výrobek), VM192RF is a radio remote controlled RGB driver for 12 or 24VDC led strips. It allows you to set a colour manually or loop through all colours automatically, with 4 selectable fading speeds. A built-in dimmer allows the user to adjust the intensity,, regardless of the chosen colour or mode., Features, includes one 4 channel RF remote, up to 5 remotes can be linked, multiple controllers in a single room is possible, colour, intensity and mode are retained and will be restored after a power, failure, speed determined by jumper setting, can also be used as a single channel led dimmer, smooth manual scrolling through red-orange-yellow-green-blue-indigo-violet, with up/down buttons, fix a manually selected colour, Specifications, power supply: 12..24VDC, current: 2.5A/channel max. (30W/12V, 60W/24V max.), PWM frequency /resolution: 245Hz, 10-bit, intensity levels: 32, colour loop time (R->G->B->R): 50s, 1m40s, 2m30s or 3m20s, Max. ambient temp: 30°C / 86°F, transmitter frequency: 433.92MHz, remote power supply: V23GA or GP23GAC 12V battery (included), dimensions:, controller: 80x70x23mm, remote: 88x37x13mm
VMW101 ESP32 WEARABLE DEVELOPM.. 771,00 Kč Nejsou PSE 5505-129
1 ks 771,00 Kč
ESP32 WEARABLE DEVELOPMENT BOARD, Get ready to meet the most versatile wearable and ESP32 based development board of the moment! Its 100% Arduino compatible and its easy and invisible to wear thanks to its uniquely thin PCB with 8 x sewable pads. Plus, it wont sting you because the PCB design has no sharp edges. Also, 4 of the pads are capacitive touch-enabled., As for the versatility, this little development board of 56 x 50 x 7.5 mm packs a lot of features such as a hall effect sensor, a temperature sensor and an ultra-low power analog pre-amplifier. But the neatest on-board feature is undoubtedly the ability to connect the board to WiFi and Bluetooth. Getting any ideas? Heres one: connect the board with our BirghtDot wearable LEDs collection and make them react to text or social messages, magnets, sounds, time, temperature and more!, You can easily connect this wearable with a battery thanks to the JST connector and you dont have to worry about high power consumption because the board also features a deep sleep modus to keep its consumption to a minimum when you dont need it. To top things off, this thin board is at least 10 times faster than an Arduino Uno because of its super high 240 MHz clock., Go take a look at the BrightDot wearable LED boards and get creative!, Features, on board WiFi and Bluetooth, 8 x easy sewable pads:, 4 x regular power pads, 4 x capacitive touch-enabled pads, 1 x on-board orange LED, hall effect sensor, temperature sensor, ultra-low power analog pre-amplifier, integrated LiPo battery charger, dedicated reset button, 2 × 8-bit DACs, ultra-thin PCB, Arduino compatible, compatible with all BrightDot wearable LED boards, based on the ESP32, SPI, I2S, I2C and UART interfaces, the LED PWM, UART, I2C, I2S, and general purpose SPI functions can be configured to any GPIO, 12-bit SAR ADC, LED PWM (up to 16 channels), deep sleep mode to lower power consumption when preferable, Specifications, general purpose IO : 17, processors:, CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS, ultra low power (ULP) co-processor, memory:, 520 KB SRAM, 448 KB ROM, wireless connectivity:, WiFi: 802.11 b/g/n, Bluetooth: v4.2 BR/EDR and BLE, power management:, max current consumption : 300 mA, deep sleep power consumption : 10 µA, max battery input voltage: 6 V, max battery charge current : 450 mA, dimensions: 56 x 50 x 7.5 mm (W x L x H)
Reklama:

Velký dron s HD kamerou Létejte z pohledu pilota pomocí obrazovky mobilu. Foťte a natáčejte úžasná letecká videa a snímky.